QVIX-Fire Computerized Electronic Firing System

Features of the QVIX-Fire Computerized Electronic Firing System

1. Designed to be a workhorse in the industry (Built to last).

2. Quad redundant firing voltage (Dual 170 volt high voltage with dual 12 volt automatic low voltage backup)

3. Accurate 38-millisecond pulse firing mode.

4. Capable of firing full fronts every 100 milliseconds.

5. Redundant cable paths supported with automatic fail-over (Uses inexpensive 8 conductor Ethernet cables for master to slave hookups)

6. System supports redundant master modules (and redundant laptop computers) with full synchronization (both Laptop PC,  master hardware and software) with the active master module. The only system in the industry to do this!

7. Allows up to 4,000 feet between the master and slave modules before needing a small signal booster module.

8. Enclosures are made of tough aircraft style anodized aluminum for strength and durability (No cheap plastic or fiberglass boxes used).

9. Laser etched labeling on all enclosures help maintain readability even in the dark.

10. All power to the slave modules are centrally controlled.

11. Full real-time digital monitoring of every slave module and firing position in the layout.

12. Backlit LCD readout of every firing position at the slave module level.     al slave m

13. Full, safe testing of every cue in the firing module at both the slave (Backlit LCD Digital display) and the master controller (Laptop PC).

14. Does not require a hookup to the master module for the testing of a slaves cue status (Testing the electronic match).

15. Uses one of the most advanced and powerful computerized firing system software programs in the industry.

16. Large (and well labeled) firing module (slat) hookups (heavy push lever wire grippers) to the electronic matches.

17. LED indicators on each firing module (slat) showing system status and active warning mode.

18. Slave computer module is firmware (software) upgradeable (No obsolescence)

19. Main firing computer software program is fully updatable (No obsolescence)

20. Separate key switch for enabling firing voltage.

21. Separate power on switch.

22. Programmable dead man switch (Switch can either stop entire show or disable electronic firing only)

23. Entire system runs off a separate 12-volt battery system. (Master module includes a built-in LCD digital voltmeter readout of the 12 volt system)

24. System can be fired manually (either simultaneously with or without slave module) using the QVIX-Fire Manual Firing Module.

25. Uses digital time-code from any music format (WAV, mpeg, MIDI, WMA, etc)

26. Multiple built in safety features for the protection of the user.

27. Supports importing inventory product information from the QVIX Fireworks Inventory System software.